ProBike Motorcycle Workshop Equipment

Dynamometers

Fuchs 361 Evolution
Fuchs 361 Eddy Current Test Bench
361

361 Eddy Current Dynamometer

The 361 is the same specification as the 301 but is fitted with the eddy current brake with a torque-cell module to measure power while using the brake, allowing closed-loop control of the brake. The software can be pre-programmed for cyclic operation to simulate wind resistance, hills, drive cycles, etc. The software measures rpm, power, torque, road speed and wheel speed in real time and then saves the data with details of the bike and customer to produce an extensive database of information. CE guards, ramp, software and automatic weather station are all included in the basic price. Extraction and cooling fans can be purchased as required. You can either add ancillaries yourself, or choose from the options like extraction fans, cooling fans and gas analysis, to build a complete testing unit to the specifications you require.

FUNCTIONS:
1. Step tests, loaded sweep tests, and road simulations

2. Simulate effects of wind resistance, hills etc.

3. Air/fuel mapping

4. Fuel injection tuning

5. Carburettor tuning

6. Fault diagnosis

7. Multiple gear tests

8. Response tests

9. Multiple comparisons

10. Acceleration tests

STANDARD FEATURES:

1. Eddy Current brake with torque cell to measure power

2. Step tests, loaded sweep tests, and road simulations available with the software.

3. Manual 2 point wheel clamp

4. Wheel speed sensor.

5. Roller speed sensor.

6. Safety barriers (CE) with Perspex screens

7. Roller Brake (CE specifications)

8. Cover plates for exhaust extraction inlets

9. Integral folding access ramp, which doubles as safety barrier (CE)

10. Non-slip chrome roller with grove (for alignment check) and safety brake.

11. Monobloc chassis in 3mm steel with chequer plate deck

12. Fast adjustment for ramp clearance according to motorcycle

13. Databank of Motorcycle Test parameters

14. Carburettor Tuning

15. Fuel Injection Tuning

16. Fault diagnosis

COMPREHENSIVE SOFTWARE

Genuine Windows software: Curves for power & torque: overlay crankshaft, gearbox and rear wheel curves corrected for DIN, ISO or CE95. Comparison of up to 6 different graphs.

DISPLAY OPTIONS FOR TEST RESULTS

Output	Rear wheel, gearbox, and crankshaft.
Units	Hp & Kgm; KW & Nm; force in Kg or N.
Curves in relation to	RPM, Km/h or MPH, time, distance.
Corrections	DIN, ISO, EC, or gross (no correction)

COMPREHENSIVE range of OPTIONAL FEATURES

Forced air cooling for engine and exhausts - Powerful specially designed cooling fans cool the engine and exhaust pipes providing a carefully controlled test environment for accurate, repeatable results.

Integral exhaust extraction system - a powerful extraction fan designed for dyno work is integrated within the chassis together with magnetic extraction intakes which fix to the safety ramp for a neat, efficient system - essential for safe testing.

Rear wheel cooling - An additional integral cooling fan for the rear tyre, brake and silencers allows intensive testing without overheating.

Automatic pneumatic wheel clamp - No straps are used to hold the motorcycle, one person can load and unload a bike quickly and safely. The bike's rear tyre is not subjected to abnormal stresses. This allows the following tests to be performed:

¨ Detection of play in steering head and swing arm bearings.

¨ Confirmation of front and rear suspension operation, damping and condition.

¨ Dynamic wheel and frame alignment test.

¨ Transmission and chain check.

Air / fuel meter ("lambda sensor") - gives a fast indication of the mixture status. Fuchs software can display the air/fuel ratio on the power curve printout. Can be used with "OptiMap" automatic tuning software for RapidBike modules.

Integrated 4-Gas Analyser - a must for accurate fuel injection tuning and fault diagnosis. Air/fuel meters can tell you if you have an overall rich or lean mixture, but not why. Gas analysis can indicate ignition or other combustion problems that will not be shown by an air fuel meter, saving you time on that tricky engine.

Modular sensor unit – enable integration of up to 16 external sensors.

PLEASE CALL FOR FULL SALES PACK

E-Mail: Sales@ProBike.co.uk