ProBike Motorcycle Workshop Equipment

Carb Tools & Gas Analysers

90 Degree Carb Tool
Carburettor Adjustment Tool - Makes Adjustment Easy! New improved version.
CARB
£65.00 + VAT & Carriage

The 90-degree Carb Tool is a professional quality tool at a sensible price. Perfect for those impossible to reach idle mixture screws. This is our latest improved, stronger, pro quality tool for 2011. Do not confuse this with cheap DIY tools – this is a professional quality tool for technicians.

Features Include:

· Unique gearbox drive with zero free play.

· Precision made of anodised aircraft grade aluminium & stainless steel.

· Ensures accurate adjustment.

· Positive click on each sixteenth of a turn for super-fine adjustment.

· Very low overall height of just 18mm.

· Uses standard ¼" square drive accessories or ¼” / 6mm hex bits.

· Strongest tool of its type on the market

· Max torque is 60 in. lbs. (6.8Nm)

· 45cm / 17.5” long

· User replaceable gears

· Complete with five ¼” hex drive bits (all 13mm / ½” long) –

o Straight-slot

o Phillips

o D-shaped air/fuel mixture screw bit

o 6mm hex jet bit

o ¼” hex to ¼” drive bit

No matter what kind of bike or ATV you are working on, sometimes it seems like the manufacturers have a secret rule that says they have to design at least one or two fasteners on every vehicle that are impossible to get to. A bolt or a screw that is tantalizingly placed just out of reach, or sandwiched between two components where there is no room to get a screwdriver or socket to.

Luckily we have the tool to take care of annoying fasteners like this. The 90-Degree Hex Driver is a gear driven tool that will drive any ¼” hex bit with a simple twist of the handle. With a short bit installed the tool's total height is approximately 18mm or ¾”, so it is able to fit into the tightest spaces. The 90 Degree Hex Driver comes with a selection of bits, including flat head and Phillips screwdriver bits, a 6mm hex and a ¼” square drive adapter. There is also a special D-Shape adapter to adjust carburettor mixture screws as used on many Honda motorcycles. Additionally, any ¼” hex drive bit will fit into the tool as well as ¼” square drive sockets so the possibilities are limitless. The 90-degree driver was developed to access and adjust hard to reach mixture screws on carburettors, but it can also install and remove fasteners with low torque applications. The tool has a 60 inch/pound (approx 6.8Nm) torque limit, so it also works great for those small, hidden fasteners.

The drive handle has a detent, so the tool can be turned in 1/16^th turn detents, or 22.5 degrees per click for super-fine repeatable adjustment. The detent is also adjustable and/or removable, to create the smoothest feel.  Its length of 45cm (17 ½”) gives it plenty of reach to get into tight places.

E-Mail: Sales@ProBike.co.uk