ProBike Motorcycle Workshop Equipment

Carb Tools & Gas Analysers

2 Cylinder Gas Kit
Aprilia / Ducati Gas Analyser Adaptor
AP2WAY
£99.00 + VAT & Carriage

2-BRANCH CONNECTION KIT & CONNECTION ADAPTERS

With most multi-cylinder motorcycles the exhausts are joined together, meaning that emissions measured at the silencer(s) are a combination of the outputs of all cylinders. Sometimes it is possible to measure each cylinder emissions individually, where threaded connection points are provided on the exhaust downpipes.

Italian bikes like Aprilia & Ducati have 1/8" gas threaded take-off points. The 2-branch connector kit has 2 take-off adaptors which incorporate integral cooling coils to dissipate heat from the exhaust gases. These are connected to lengths of rubber tubing which connect to the inlets provided on the 2-way connection valve. This kit can be easily connected to the MicroGas or most other gas analysers.

When using the 2-branch kit, first note which cylinder is connected to which tap. Open only the first tap, allow the gasses to stabilise, measure the emissions, then store the gas analysis result using the MicroGas keypad (or with other analysers, write on a piece of paper). You can add comments - remember to note which cylinder the test relates to. Then proceed to test the other cylinder in a similar fashion: close the first tap, open the second one and test as before. When you have finished taking measurements, you can view the tests you have made and select which tests you want to print.

E-Mail: Sales@ProBike.co.uk